PAL LSI Modules
Agitator Module
For the incubation and agitation of samples
- 6 positions for 20mL vials
- Temperature range 30° - 200°C
- Agitation speed 250 - 750rpm
- Optional adapter for 2mL or 10mL vials
Barcode Reader Module
This Barcode Reader Module reads the barcode labels on 2mL, 10mL and 20mL vials regardless of the orientation on the vials. Therefore it ensures highest process safety and traceability
- Reads horizontal 1 D barcodes
- Two scanners allow identification of vials irrespective of position of the barcode
- Works with 2mL, 10mL and 20mL vials
Fast Wash Module
- Cleans syringes of gauges 19 to 26
- Integrated pumps for active wash solvent delivery
- Supports two different wash solvents (e.g. aqueous and organic)
- Reduced wash solvent consumption by automatic flow adjustments
- Can be mounted underneath Valve Drives to minimize required space
Large Wash
- Wash Module for large volume injections
- 2x 100mL solvent vials
- Waste port with connector for waste bottle
Standard Wash
- Wash Module for low volume injections
- 4x 10mL wash solvent vials
- 1x 10mL waste vial
- Optional waste port to connect a waste bottle
Peltier Stack 2DW Module
- 2x MTP (Multi Titer Plate)
- or 2x DW (Deep Well Plate)
- or 2x VT15 (15 x 10mL)
- or 2x VT54 (54 x 2mL)
- or 2x VT70 (70 x 1mL)
- or combinations
Peltier Stack 6DW Module
For the storage of six racks or plates under defined temperature conditions between 4°C and 40°C. Allows to use transparent standard vials with light sensitive compounds. A maximum of four Peltier Stacks can be configured on a PAL with extended x-axis length.Capacity:
- 6x MTP (Multi Titer Plate)
- or 6x DW (Deep Well Plate)
- or 6x VT15 (15 x 10mL)
- or 6x VT54 (54 x 2mL)
- or 6x VT70 (70 x 1mL)
- or combinations
Stack 6DW / 12MT Module
For the storage of racks or plates at room temperature. Allows to store samples with light sensitive compounds. A maximum of four Stacks can be configured on a PAL with extended x-axis length.Capacity 6DW:
- 6x MTP (Multi Titer Plate)
- or 6x DW (Deep Well Plate)
- or 6x VT15 (15 x 10mL)
- or 6x VT54 (54 x 2mL)
- or 6x VT70 (70 x 1mL)
- or combinations
- 12x MTP (Multi Titer Plate, shallow well)
Trayholder
The Trayholder offers sample storage at room temperature. A PAL with extended x-axis length can hold up to 7 Trayholders.Capacity:
- 3x MTP (Multi Titer Plate)
- or 3x DW (Deep Well Plate)
- or 3x VT15 (15 x 10/20mL
- or 3x VT54 (54 x 2mL)
- or 3x VT70 (70 x 1mL)
- or combinations
- or 60x 10/20mL (with one R60 tray)
Valve Drive Module
Universal Valve Drive Module for sample injection, column switiching for online LC-LC-MS or online SPE-LC-MS, multiplexing, column selection and many more.
- The Valve Drive Module supports VICI/Valco and Rheodyne valve types.
- Injection port bottom sensing minimizing carryover
- Constant Force Technology to reduce dead volume during injection process
- UHPLC/HPLC: up to 50% faster switching times for optimum system performance and prolonged column life time
- Stackable design to reduce the space demand and allow any flexible configuration
- Huge flexibility to arrange multiple valve solutions
- The Fast Wash Module is also stackable below a Valve Drive
Vortex Module
For efficient mixing during liquid homogenization and extraction steps.
- Magnetic transportation
- Standard vial sizes: 2mL / 10mL / 20mL
- One additional slot for custom size vials
- Provides very efficient mixing